About the 1552 Access Point. The 1552 access point supports two radios (2.4-GHz and 5-GHz) and provides client access without the need for a license.
The 5-GHz radios are primarily used for backhaul operations to reach a wired network and the 2.4-GHz radio is used for wireless clients. Depending on the radio, the access point can support 1 to 300 Mb/s data rates for specific data rates, refer to.
Appendix D, Access Point Specifications. The 1552 access point supports the modularity of the 1520 series and allows flexibility in radio configuration.
In addition to full interoperability with 802.11n clients, the 1552 access point interoperates with legacy clients and offers enhanced backhaul performance. The 1552 access point can also be configured with an integrated DOCSIS 3.0/Euro DOCSIS 3.0 cable modem.
The access point is a standalone unit that can be cable strand or tower mounted. The access point can also operate as a relay node for other access points not directly connected to a wired network. Intelligent wireless routing is provided by the patented.Adaptive Wireless Path Protocol (AWPP). This enables each access point to identify its neighbors and intelligently choose the optimal path to the wired network by calculating the cost of each path in terms of signal strength and the number of hops required to get to a controller. The access point is configured, monitored, and operated through a Cisco wireless LAN controller (hereafter called a controller) as described in the. Cisco Wireless LAN Controller Configuration Guide. Cisco Wireless Mesh Access Points, Design and Deployment Guide, Release 7.3.
Describes how to plan and initially configure the Cisco mesh network, which supports wireless point-to-point, point-to-multipoint, and mesh deployments. The access point supports hardware-based advanced encryption standard (AES) encryption between wireless nodes to provide end-to-end security. This chapter provides information on the following topics.The model numbers (or part numbers) and configuration for the Cisco Aironet 1552 Outdoor Mesh Access Points are described in. A detailed list of components supported by each 1552 access point model is shown in. The Cisco Aironet 1552 Series access points includes two additional models, 1552S and 1552H, that are specifically intended for deployment in hazardous locations. For information on these models, refer to the Cisco Aironet 1550 Series for Hazardous Locations Installation Guide. For a detailed description of the declarations of conformity and regulatory information for the 1552 access points refer to Appendix B, Declarations of Conformity and Regulatory Information. 1552 Access Point Model Numbers and Descriptions. Two-radio (2.4 GHz and 5 GHz) modular version. This model supports three (3) external dual-band antenna ports. An optional Battery Backup Unit (BBU) and Small Form Factor Pluggable (SFP) fiber module can be ordered with the AP. Countries (regulatory domains) are represented by the variable x in the product model number.
For specific regulatory domains supported by this model, refer to the product data sheet at. Components of Each 1552 Access Point Model.
802.3af (for example, video). The item "Cisco Aironet 1552E Outdoor Mesh Access Point" is in sale since Wednesday, June 15, 2016.
This item is in the category "Computers/Tablets & Networking\Home Networking & Connectivity\Wireless Access Points". The seller is "clanj123" and is located in Miami, Florida. This item can be shipped worldwide.
Wireless Data Rate: 300Mbps