Wireless Access Point

Cisco WAP371-A-K9 Wireless Access Point

Cisco WAP371-A-K9 Wireless Access Point

Cisco WAP371-A-K9 Wireless Access Point    Cisco WAP371-A-K9 Wireless Access Point

IEEE 802.11ac 802.11n 802.11g 802.11b 802.3af 802.3u 802.1X (security authentication) 802.1Q (VLAN) 802.1D (Spanning Tree) 802.11i (WPA2 security) 802.11e (wireless QoS) IPv4 (RFC 791) IPv6 (RFC 2460). LAN Gigabit Ethernet auto-sensing 10/100/1000 Ethernet with support for 802.3af/at PoE Power port for AC adapter. Internal antennas optimized for installation on a wall or ceiling. Power WLAN (wireless) LAN (Ethernet).

VLAN support 1 management VLAN plus 16 VLANs for SSIDs 802.1X supplicant SSID-to-VLAN mapping Auto channel selection Spanning tree Load balancing IPv6. IPv6 RADIUS, syslog, Network Time Protocol (NTP), etc. Layer 2 - 802.1Q-based VLANS, 16 active VLANS plus 1 management VLAN.

WPA/WPA2 Access control HTTPS secure management SSID broadcast Rogue access point detection. Mounting bracket included for easy ceiling or wall mounting. Wi-Fi Multimedia and Traffic Specification (WMM TSPEC), Client QoS. Up to 950 Mbps data rate (real-world throughput will vary) Up to 64 connective users, 30 active users per radio. Single Point Setup 8 access points per cluster 240 active clients per cluster.

Dual concurrent radios (2.4 and 5 GHz). Dual radio, orthogonal frequency division multiplexing (OFDM).

802.11n/ac 3x3 multiple-input multiple-output (MIMO) with 3 spatial streams at 5 GHz 2x2 MIMO with 2 spatial streams at 2.4 GHz 20-, 40-, and 80-MHz channels for 802.11ac 20- and 40-MHz for 802.11n PHY data rate up to 1.6 Gbps 802.11 dynamic frequency selection (DFS). 54, 48, 36, 24, 18, 12, 9, 6, 11, 5.5, 2, and 1 Mbps. 6.5 to 450 Mbps. 20-MHz bandwidth: MCS 0-15 for supported data rates. 40-MHz bandwidth: MCS 0-15 for supported data rates.

6.5 to 1300 Mbps. 20-MHz bandwidth: MCS 0-9 for supported data rates. 40-MHz bandwidth: MCS 0-9 for supported data rates. 80-MHz bandwidth: MCS 0-9 for supported data rates. Frequency Band and Operating Channels.

802.11n 20 MHz (2.4-GHz Band). 802.11n 40 MHz (2.4-GHz Band). 802.11n 20 MHz (5-GHz Band). 5180 5320 5500 5700 5825. 802.11n 40 MHz (5-GHz Band).

2.4 GHz 802.11b/g 20 MHz: 3 802.11n 20 MHz: 3 5 GHz 802.11a 20 MHz: 21 802.11n 20 MHz: 21, 40 MHz: 9 802.11ac 20 MHz: 21, 40 MHz: 9, 80 MHz: 5. 5 GHz UNII-1 (5150 to 5250 MHz). 5 GHz UNII-2 (5250 to 5350 MHz)/UNII-2 Extended (5470 to 5725 MHz). 5 GHz UNII-3 (5725 to 5850 MHz). Wireless distribution system (WDS) Fast roaming 16 Multiple SSIDs Wireless VLAN map WLAN security Wi-Fi Multimedia (WMM) with unscheduled automatic power save.

Access Point mode, WDS Bridging, Workgroup Bridge mode. IEEE 802.3at Ethernet switch Cisco power injector: SB-PWR-INJ2-xx AC adapter: SB-PWR-12V2A-xx Peak power: 17W. Safety UL 60950-1 CAN/CSA-C22.2 No. 60950-1 IEC 60950-1 EN 60950-1 Radio Approvals FCC Part 15.247, 15.407 RSS-210 (Canada) EN 300.328, EN 301.893 (Europe) AS/NZS 4268.2003 (Australia and New Zealand) EMI and susceptibility (Class B) FCC Part 15.107 and 15.109 ICES-003 (Canada) EN 301.489-1 and -17 (Europe). Operating Temperature: 32 to 104°F / 0 to 40°C Storage Temperature: -4 to 158°F / -20 to 70°C Operating Humidity: 10 to 85% non-condensing Storage Humidity: 5 to 90% non-condensing. 64 MB RAM 32 MB flash.

9.05 x 9.05 x 1.69 / 229.87 x 229.87 x 42.93 mm. 1.81 lb / 0.82 kg. 11.1 x 10.3 x 3.4. The item "Cisco WAP371-A-K9 Wireless Access Point" is in sale since Thursday, January 18, 2018. This item is in the category "Computers/Tablets & Networking\Home Networking & Connectivity\Wireless Access Points".

The seller is "vestabond" and is located in Fort Lauderdale, Florida. This item can be shipped to United States.

  • Model: WAP371-A-K9
  • MPN: WAP371-A-K9
  • Brand: Cisco


Cisco WAP371-A-K9 Wireless Access Point    Cisco WAP371-A-K9 Wireless Access Point