Wireless Access Point

Cisco Wifi Access Point AIR-LAP1142N Running Autonomous IOS 15.3 as AIR-AP1142N

Cisco Wifi Access Point AIR-LAP1142N Running Autonomous IOS 15.3 as AIR-AP1142N
Cisco Wifi Access Point AIR-LAP1142N Running Autonomous IOS 15.3 as AIR-AP1142N

Cisco Wifi Access Point AIR-LAP1142N Running Autonomous IOS 15.3 as AIR-AP1142N   Cisco Wifi Access Point AIR-LAP1142N Running Autonomous IOS 15.3 as AIR-AP1142N
This listing is for a used Cisco Aironet Wireless Access Point (Model AIR-LAP1142N-A-K9). Access Point is running IOS 15.3 Autonomous mode software (which means that it can run as a standalone unit without the need for a central Wireless Lan Controller). AP was pulled from a working environment and has been tested and confirmed to be working properly. AP has been reset to the default Cisco configuration so that all passwords have been removed and it is now ready to be configured. AP contains Wireless Radios for Dual-band operation on both 2.4 GHz and 5 GHz Wifi at 802.11a/g/n speeds, as well as 1 Gigabit Ethernet Port (RJ45), and 1 Console Port (RJ45). AP can be powered with either Power over Ethernet (PoE 802.3af) or a standalone 48v Power injector or Standalone 48v power supply {"Cisco AP1140 Local Power Supply" (AIR-PWR-B=) or "Cisco AP1140 Power Injectors" (AIR-PWRINJ4=)} Power Source is NOT included in this listing.

Looking for a power supply and mounting hardware? Check out my other listing HERE. Access Point may have some minor cosmetic damage as would be expected from normal use in an office environment: scratches, stickers/residue, scuffs, etc. Any damage, if present, will be only cosmetic in nature and not affect the functionality of the Access Point. All units are tested before sale and are guaranteed to funtion properly.

I have a record of excellent service, checkout my feedback for yourself. Example Output of the "show version" command. Cisco IOS Software, C1140 Software (C1140-K9W7-M), Version 15.3(3)JAB, RELEASE SOFTWARE (fc1). Compiled Tue 02-Sep-14 22:55 by prod_rel_team.

ROM: Bootstrap program is C1140 boot loader. BOOTLDR: C1140 Boot Loader (C1140-BOOT-M) Version 12.4(18a)JA3, RELEASE SOFTWARE (fc1). Ap uptime is 3 minutes. System image file is flash:/c1140-k9w7-mx. This product contains cryptographic features and is subject to United.

States and local country laws governing import, export, transfer and. Third-party authority to import, export, distribute or use encryption.

Importers, exporters, distributors and users are responsible for. By using this product you. Agree to comply with applicable laws and regulations. And local laws, return this product immediately.

Laws governing Cisco cryptographic products may be found at. Cisco AIR-AP1142N-A-K9 (PowerPC405ex) processor (revision B0) with 98294K/32768K bytes of memory. PowerPC405ex CPU at 586Mhz, revision number 0x147E. 32K bytes of flash-simulated non-volatile configuration memory.

1140 Series Access Point is a business-ready, 802.11n access point designed for simple deployment and energy efficiency. The high-performance platform, which offers at least six times the throughput of existing 802.11a/g networks, prepares the business for the next wave of mobile devices and applications. Building on the Cisco Aironet heritage of RF excellence, the 1140 Series combines the industry's most widely deployed 802.11n technology with a sleek industrial design that blends seamlessly into any enterprise environment.

Designed for sustainability, the 1140 Series delivers high performance from standard 802.3af Power over Ethernet or standalone power supplies & injectors. Building on the Cisco Aironet heritage of RF excellence, the 1140 Series delivers industry-leading performance for secure and reliable wireless connections. Enterprise-class silicon and optimized radios deliver a robust mobility experience using Cisco M-Drive technology, which includes. ClientLink improves reliability and coverage for legacy clients.

BandSelect improves 5-GHz client connections in mixed client environments. VideoStream uses multicast to improve rich-media applications. All of these features ensure the best possible end-user experience on the wireless network. Product Specifications for Cisco Aironet 1140 Series Access Points. 2x3 multiple-input multiple-output (MIMO) with two spatial streams.

Legacy beamforming (hardware supports this capability; not yet enabled in software). PHY data rates up to 300 Mbps. Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx).

802.11 dynamic frequency selection (DFS) (Bin 5). Cyclic shift diversity (CSD) support. 802.11a: 6, 9, 12, 18, 24, 36, 48, and 54 Mbps.

802.11g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, and 54 Mbps. 802.11n data rates (2.4 GHz and 5 GHz). Frequency Band and 20-MHz Operating Channels.

2.412 to 2.462 GHz; 11 channels. 5.180 to 5.320 GHz; 8 channels. 5.500 to 5.700 GHz, 8 channels (excludes 5.600 to 5.640 GHz). 5.745 to 5.825 GHz; 5 channels.

2.412 to 2.472 GHz; 13 channels. 5.500 to 5.700 GHz, 8 channels.

2.412 to 2.472 GHz, 13 channels. 5.500 to 5.620 GHz, 7 channels. 5.745 to 5.805 GHz, 4 channels.

5.280 to 5.320 GHz; 3 channels. 5.500 to 5.700 GHz, 11 channels. This varies by regulatory domain. Refer to the product documentation for specific details for each regulatory domain.

Maximum Number of Non-Overlapping Channels. 20 dBm with 1 antenna.

20 dBm with 2 antennas. 802.11n non-HT duplicate (802.11a duplicate) mode. The maximum power setting will vary by channel and according to individual country regulations. Refer to the product documentation for specific details.

11 dBm (12.5 mW). 8 dBm (6.25 mW). 5 dBm (3.13 mW). 2 dBm (1.56 mW). 1 dBm (0.78 mW).

2.4 GHz, Gain 4.0 dBi, horizontal beamwidth 360°. 5 GHz, Gain 3 dBi, horizontal beamwidth 360°. Status LED indicates boot loader status, association status, operating status, boot loader warnings, boot loader errors. Dimensions (W x L x H).

Access point (without mounting bracket): 8.7 x 8.7 x 1.84 in. (22.1 x 22.1 x 4.7 cm).

2.3 lbs (1.04 kg). Nonoperating (storage) temperature: -22 to 185°F (-30 to 85°C).

Operating temperature: 32 to 104°F (0 to 40°C). Operating humidity: 10 to 90% percent (non-condensing). AP1140: 44 to 57 VDC. Power Supply and Power Injector: 100 to 240 VAC; 50 to 60 Hz. Cisco AP1140 Power Injectors (AIR-PWRINJ4=).

Cisco AP1140 Local Power Supply (AIR-PWR-B=). When deployed using PoE, the power drawn from the power sourcing equipment will be higher by some amount dependent on the length of the interconnecting cable. This additional power may be as high as 2.45W, bringing the total system power draw (access point + cabling) to 15.4W.

FCC Part 15.247, 15.407. EN 300.328, EN 301.893 (Europe). AS/NZS 4268.2003 (Australia and New Zealand). EMI and susceptibility (Class B). FCC Part 15.107 and 15.109.

EN 301.489-1 and -17 (Europe). EN 60601-1-2 EMC requirements for the Medical Directive 93/42/EEC. IEEE 802.11a/b/g, IEEE 802.11n, IEEE 802.11h, IEEE 802.11d. 802.11i, Wi-Fi Protected Access 2 (WPA2), WPA. Advanced Encryption Standards (AES), Temporal Key Integrity Protocol (TKIP).

Extensible Authentication Protocol-Transport Layer Security (EAP-TLS). EAP-Tunneled TLS (TTLS) or Microsoft Challenge Handshake Authentication Protocol Version 2 (MSCHAPv2). Protected EAP (PEAP) v0 or EAP-MSCHAPv2.

Extensible Authentication Protocol-Flexible Authentication via Secure Tunneling (EAP-FAST). PEAPv1 or EAP-Generic Token Card (GTC). Calculated Mean Time Between Failure (MTBF). The item "Cisco Wifi Access Point AIR-LAP1142N Running Autonomous IOS 15.3 as AIR-AP1142N" is in sale since Wednesday, October 21, 2015.

This item is in the category "Computers/Tablets & Networking\Home Networking & Connectivity\Wireless Access Points". The seller is "lasrewson" and is located in Smyrna, Georgia. This item can be shipped to United States, to Canada.

  • Brand: Cisco
  • Model: AIR-LAP1142N-A-K9
  • IOS Version: C1140-K9W7-M Version 15.3(3)JAB


Cisco Wifi Access Point AIR-LAP1142N Running Autonomous IOS 15.3 as AIR-AP1142N   Cisco Wifi Access Point AIR-LAP1142N Running Autonomous IOS 15.3 as AIR-AP1142N