Wireless Access Point

NEW ARUBA NETWORKS IAP-215 INSTANT 5-Ghz AP DUAL-BAND WIRELESS ACCESS POINT

NEW ARUBA NETWORKS IAP-215 INSTANT 5-Ghz AP DUAL-BAND WIRELESS ACCESS POINT
NEW ARUBA NETWORKS IAP-215 INSTANT 5-Ghz AP DUAL-BAND WIRELESS ACCESS POINT
NEW ARUBA NETWORKS IAP-215 INSTANT 5-Ghz AP DUAL-BAND WIRELESS ACCESS POINT
NEW ARUBA NETWORKS IAP-215 INSTANT 5-Ghz AP DUAL-BAND WIRELESS ACCESS POINT

NEW ARUBA NETWORKS IAP-215 INSTANT 5-Ghz AP DUAL-BAND WIRELESS ACCESS POINT    NEW ARUBA NETWORKS IAP-215 INSTANT 5-Ghz AP DUAL-BAND WIRELESS ACCESS POINT

Multifunctional and affordable Aruba 210 series wireless access points (APs) maximize mobile device performance in medium-density, highperformance Wi-Fi environments. These compact and cost-effective dual-radio APs deliver wireless data rates of up to 1.3 Gbps to 5-GHz devices with 802.11ac technology. They also support 3x3 MIMO with three spatial streams as well as 2.4-GHz 802.11n clients at data rates up to 450 Mbps. The AP-215 and IAP-215 models have six integrated omnidirectional downtilt antennas, while the AP-214 and IAP-214 support external, detachable dual-band antennas using three RP-SMA connectors. The 210 series features patented ClientMatch technology to eliminate sticky client behavior while users roam.

ClientMatch continuously gathers session performance metrics from mobile devices. If a mobile device moves away from an AP or if RF interference impedes performance, ClientMatch automatically steers the device to a better AP.

ACC lets WLANs to perform at peak efficiency by minimizing interference from 3G/4G LTE networks, distributed antenna systems and commercial small cell/femtocell equipment. Quality of service for unified communication apps. High-performance, cost-effective gigabit Wi-Fi for the enterprise. Ships with AOS image: Yes.

Ships with Instant image:Yes. Wi-Fi standards: 802.11 a/b/g/n/ac. Radio MIMO type: 3x3:3. Max number of BSSIDs (per radio):16. Max number of associated clients per radio: 255. Max transmit power (per radio chain, MCS0) 2.4 GHz/5 GHz:18 dBm. RF connectors (RP-SMA): 3x DB (AP-214). Integrated antennas: 6x omni downtilt (AP-215). Jumbo frame support on uplink: Yes. Ships with AC-to-DC adapter: No.

Temperature range: 0º C to +50º C. Enclosure volume (mm): 180 x 180 x 45. Weight (unit only, with desk mount): 650 g. Minimum software version: ArubaOS 6.4.2.0 & InstantOS 4.1.1.0. Maximum power consumption (excluding USB, PoE PSE):13.6W (DC) 14.9W (PoE).

Max IPsec encrypted wired throughput (RAP mode):20. The 210 series supports your choice of operating modes to meet unique management and deployment requirements. Controller-managed AP or Remote AP (RAP) running ArubaOS.

When managed by Aruba Mobility Controllers, 210 series APs offer centralized configuration, data encryption, policy enforcement and network services as well as distributed and centralized traffic forwarding. Please refer to the Aruba Mobility Controller data sheets for more details. Aruba Instant AP running InstantOS. In Aruba Instant mode, a single AP automatically distributes the network configuration to other Instant APs in the WLAN. Simply power-up on Instant AP, configure it over the air, and plug in the other APs the entire process takes about five minutes.

For large installations across multiple sites, the Aruba Activate service significantly reduces deployment time by automating device provisioning, firmware upgrades, and inventory management. With Aruba Activate, Instant APs are factoryshipped to any site and configure themselves when powered up. 2.4-GHz (450 Mbps max rate) and 5-GHz (1.3 Gbps max rate) radios, each with 3x3 MIMO and six integrated omni-directional downtilt antennas.

2.4-GHz (450 Mbps max rate) and 5-GHz (1.3 Gbps max rate) radios, each with 3x3 MIMO and three combined, diplexed (dual-band) external RP-SMA antenna connectors. Adaptive Radio Management (ARM) technology automatically assigns channel and power settings, provides airtime fairness and ensures that APs stay clear of all sources of RF interference to deliver reliable, high-performance WLANs. 210 series APs can be configured to provide part-time or dedicated air monitoring for spectrum analysis and wireless intrusion protection, VPN tunnels to extend corporate resources to remote locations, and wireless mesh connections where Ethernet drops are not available.

Capable of part-time or dedicated air monitoring, the spectrum analyzer remotely scans the 2.4-GHz and 5-GHz radio bands to identify sources of RF interference. With an OpenDNS service subscription, Aruba Instant RAPs deliver integrated web filtering, malware and botnet protection to every device connected to the WLAN. Integrated Trusted Platform Module (TPM) for secure storage of credentials and keys. SecureJack-capable for secure tunneling of wired Ethernet traffic.

Remote AP (RAP) for branch deployments. Spectrum analyzer, dedicated or hybrid. Secure enterprise mesh (targeted for introduction in ArubaOS 6.4.3). AP type: Indoor, dual radio, 5 GHz 802.11ac and 2.4 GHz 802.11n 3x3:3. Software-configurable dual radio supports 5 GHz (Radio 0) and 2.4 GHz (Radio 1). 3x3 MIMO with three spatial streams and up to 1.3 Gbps wireless data rate. Supported frequency bands (country-specific restrictions apply). 2.4000 GHz to 2.4835 GHz. 5.150 GHz to 5.250 GHz. 5.250 GHz to 5.350GHz. 5.470 GHz to 5.725GHz. 5.725 GHz to 5.850GHz. Available channels: Dependent on configured regulatory domain. Dynamic frequency selection (DFS) optimizes the use of available RF spectrum.

802.11b: Direct-sequence spread-spectrum (DSSS). 802.11a/g/n/ac: Orthogonal frequency-division multiplexing (OFDM).

802.11b: BPSK, QPSK, CCK. 802.11a/g/n/ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM. Transmit power: Configurable in increments of 0.5 dBm. Maximum (aggregate, conducted total) transmit power (limited by local regulatory requirements). 2.4-GHz band: +23 dBm (18 dBm per chain).

5-GHz band: +23 dBm (18 dBm per chain). Note: conducted transmit power levels exclude antenna gain.

For total (EIRP) transmit power, add antenna gain. Advanced Cellular Coexistence (ACC) minimizes interference from cellular networks. Maximum ratio combining (MRC) for improved receiver performance. Cyclic delay/shift diversity (CDD/CSD) for improved downlink RF performance. Short guard interval for 20-MHz, 40-MHz and 80-MHz channels.

Space-time block coding (STBC) for increased range and improved reception. Low-density parity check (LDPC) for high-efficiency error correction and increased throughput. Transmit beamforming (TxBF) for increased signal reliability and range. 802.11b: 1, 2, 5.5, 11. 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54. 802.11n: 6.5 to 450 (MCS0 to MCS23). 802.11ac: 6.5 to 1,300 (MCS0 to MCS9, NSS = 1 to 3). 802.11n high-throughput (HT) support: HT 20/40.

802.11ac very high throughput (VHT) support: VHT 20/40/80. 802.11n/ac packet aggregation: A-MPDU, A-MSDU. AP-214/IAP-214: Three RP-SMA connectors for external dual-band antennas. Internal loss between radio interface and external antenna connectors (due to diplexing circuitry): 1.0 dB in 2.4 GHz and 2.0 dB in 5 GHz. AP-215/IAP-215: Six integrated downtilt omni-directional antennas for 3x3 MIMO with maximum antenna gain of 5.0 dBi in 2.4 GHz and 5.0 dBi in 5 GHz.

Built-in antennas are optimized for horizontal ceiling mounted orientation of the AP. Downtilt angle for maximum gain is roughly 30 degrees. One 10/100/1000BASE-T Ethernet network interface (RJ-45). Auto-sensing link speed and MDI/MDX. 802.3az Energy Efficient Ethernet (EEE).

PoE-PD: 48 Vdc (nominal) 802.3af or 802.3at PoE. DC power interface, accepts 1.7/4.0-mm center-positive circular plug with 9.5-mm length.

USB 2.0 host interface (Type A connector). Radio status (two; RAD0, RAD1). Reset button: factory reset (during device power-up).

Maximum (worst-case) power consumption: 14.9 watts (PoE) or 13.6 watts (DC). Excludes power consumed by external USB device (and internal overhead); this could add up to 6 watts (PoE) or 5.5 watts (DC) for 5W/1A USB device.

Maximum (worst-case) power consumption in idle mode: 8.2 watts (PoE) or 7.4 watts (DC). Direct DC source: 12 Vdc nominal, +/- 5%. Power over Ethernet: 48 Vdc (nominal) 802.3af/802.3at compliant source. USB port is disabled when using an 802.3af PoE power source; for unrestricted operation with PoE power, use an 802.3at compliant source.

When both power sources are available, DC power takes priority. Mounting brackets (2) for attaching to 9/16-inch or 15/16-inch T-bar drop-tile ceiling.

AP-220-MNT-C1: Aruba AP mount kit contains two ceiling-grid rail adapters for flat rails. AP-220-MNT-C2: Aruba AP mount kit contains two ceiling-grid rail adapters for Interlude and Silhouette style rails. AP-220-MNT-W1: Aruba AP mount kit contains one basic flat-surface wall/ceiling mount bracket. AP-220-MNT-W2: Aruba AP mount kit contains one secure flat-surface wall/ceiling mount cradle. Dimensions/weight (unit, excluding mount accessories).

180 mm x 180 mm x 45 mm (W x D x H). 220 mm x 225 mm x 55 mm (W x D x H).

Temperature: 0° C to +50° C (+32° F to +122° F). Humidity: 5% to 95% non-condensing.

Temperature: -40° C to +70° C (-40° F to +158° F). EN 60601-1-1, EN60601-1-2 For more country-specific regulatory information and approvals, please see your Aruba representative. MTBF: 538,975 hours (61.5 years) at +25° C operating temperature. Wi-Fi Alliance (WFA) certified 802.11a/b/g/n/ac. ArubaOS 6.4.2.0.

Aruba InstantOS 4.1.1.0. The item "NEW ARUBA NETWORKS IAP-215 INSTANT 5-Ghz AP DUAL-BAND WIRELESS ACCESS POINT" is in sale since Monday, December 21, 2015. This item is in the category "Computers/Tablets & Networking\Home Networking & Connectivity\Wireless Access Points".

The seller is "ianwlarson10" and is located in Los Angeles, California. This item can be shipped to United States, to Canada, to United Kingdom, DK, RO, SK, BG, CZ, FI, HU, LV, LT, MT, EE, to Australia, GR, PT, CY, SI, to Japan, to China, SE, KR, ID, to Taiwan, ZA, TH, to Belgium, to France, to Hong Kong, to Ireland, to Netherlands, PL, to Spain, to Italy, to Germany, to Austria, RU, IL, to Mexico, to New Zealand, SG, to Switzerland, NO, HR, TR, BR, CL, CO.

  • Brand: Aruba Networks
  • Model: IAP-215-US
  • Network Connectivity: Wireless-Wi-Fi 802.11a
  • Max.

    Wireless Data Rate: 5-Ghz

  • Country/Region of Manufacture: China
  • MPN: IAP-215-US


NEW ARUBA NETWORKS IAP-215 INSTANT 5-Ghz AP DUAL-BAND WIRELESS ACCESS POINT    NEW ARUBA NETWORKS IAP-215 INSTANT 5-Ghz AP DUAL-BAND WIRELESS ACCESS POINT