Wireless Access Point

New In Box Aruba Networks Ap-225 Wireless Access Point Free Shipping

New In Box Aruba Networks Ap-225 Wireless Access Point Free Shipping
New In Box Aruba Networks Ap-225 Wireless Access Point Free Shipping
New In Box Aruba Networks Ap-225 Wireless Access Point Free Shipping
New In Box Aruba Networks Ap-225 Wireless Access Point Free Shipping
New In Box Aruba Networks Ap-225 Wireless Access Point Free Shipping
New In Box Aruba Networks Ap-225 Wireless Access Point Free Shipping

New In Box Aruba Networks Ap-225 Wireless Access Point Free Shipping    New In Box Aruba Networks Ap-225 Wireless Access Point Free Shipping

HAVE A LOT OF STOCKS. Part no : AP-225 WIRELESS ACCESS POINT. Condition : new in box ARUBA NETWORKS AP-225 ACCESS POINT. For items must be in original condition. Provide international tracking no (it will takes 510 days).

We have no way of knowing or to be able to assist you with your countrys rules and regulations. If we find any damage on the new box. 2.4-GHz (600 Mbps max) and 5-GHz (1.3 Gbps max) radios, each with 3x3 MIMO and three combined, diplexed external antenna connectors. 2.4-GHz (600 Mbps max) and 5-GHz (1.3 Gbps max) radios, each with 3x3 MIMO and three integrated omni-directional downtilt antennas. Indoor, dual radio, 5 GHz 802.11ac and 2.4 GHz 802.11n indoor.

In addition to 802.11n data rates, the 2.4-GHz radio supports 802.11ac data rates using 256-QAM modulation. This gives TurboQAM-enabled clients a 33% boost above the maximum supported data rate.

Software-configurable dual radio supports 5 GHz and 2.4 GHz. 3x3 MIMO with three spatial streams and up to 1.3 Gbps wireless data rate. Supported frequency band (country-specific restrictions apply). 2.4000 GHz to 2.4835 GHz. 5.150 to 5.250 GHz.

5.250 to 5.350 GHz. 5.470 to 5.725 GHz. 5.725 to 5.850 GHz. Dependent upon configured regulatory domain. Dynamic frequency selection (DFS) optimizes the use of available RF spectrum.

802.11b: Direct-sequence spread-spectrum (DSSS). 802.11a/g/n/ac: Orthogonal frequency-division multiplexing (OFDM). 802.11n/ac: 3x3 MIMO with up to three spatial streams. 802.11b: BPSK, QPSK, CCK. 802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM. 802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM. Transmit power: Configurable in increments of 0.5 dBm. Maximum (aggregate, conducted total) Transmit Power (limited by local regulatory requirements). 2.4-GHz band: +23 dBm. Advanced cellular coexistence (ACC) feature to effectively deal with interference from cellular systems.

Maximum ratio combining (MRC) for improved receiver performance. Cyclic delay diversity (CDD) for improved downlink RF performance.

Short guard interval for 20-MHz, 40-MHz and 80-MHz channels. Space-time block coding (STBC) for increased range and improved reception. Low-density parity check (LDPC) for high-efficiency error correction and increased throughput.

802.11b: 1, 2, 5.5, 11. 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54. 802.11n: 6.5 to 450 (MCS0 to MCS15). 802.11ac: 6.5 to 1,300 (MCS0 to MCS9, NSS = 1 to 3).

802.11n High-Throughput (HT) Support. 802.11ac Very High-Throughput (VHT) Support. 15 watts, plus up to 2.5 watts for attached USB device. 12 Vdc nominal, +/- 5%.

48 Vdc (nominal) 802.3af or 802.3at-compliant source. Efficient mode PoE power save with 802.3af PoE and limited functionality. 5-GHz 802.11ac radio in 2x3:2SS mode. 2.4-GHz 802.11n radio in 1x3:1SS mode.

Unrestricted functionality with 802.3at PoE+. Three RP-SMA connectors for external dual-band antennas. Six integrated down-tilt omni-directional antennas for 3x3 MIMO with maximum antenna gain of 3.5 dBi in 2.4 GHz and 4.5 dBi in 5 GHz. Built-in antennas are optimized for horizontal ceiling mounted orientation of AP-225.

Two 10/100/1000BASE-T Ethernet network interfaces (RJ-45). Auto-sensing link speed and MDI/MDX.

MACSec encryption and 802.3az EEE. PoE-PD: 48 Vdc 802.3af PoE or 802.3at PoE+. DC power interface, accepts 1.7/4.0mm center-positive circular plug with 9.5 mm length.

USB 2.0 port (Type A connector). Serial console interface (RJ-45, TTL levels).

Ethernet link status (2x; ENET0, ENET1). Radio status (2x; RAD0, RAD1). Mounting brackets (2) for attaching to 9/16-inch or 15/16-inch T-bar drop-tile ceiling. AP-220-MNT-C2: Aruba 220 series AP mount kit contains two ceiling-grid rail adapters for Interlude and Silhouette style rails. AP-220-MNT-W1: Aruba 220 series AP mount kit contains one flat-surface wall/ceiling mount bracket.

AP-220-MNT-W2: Aruba 220 series AP mount kit contains one flat-surface wall/ceiling secure mount cradle. Dimensions (unit, excluding mount accessories). 203 mm (W) x 203 mm (D) x 65 mm (H), 8.0 (W) x 8.0 (D) x 2.6 (H). Weight (unit, excluding mount accessories). 315 mm (W) x 265 mm (D) x 100 mm (H), 12.4 (W) x 10.4 (D) x 3.9 (H).

Temperature: 0° C to +50° C (+32° F to +122° F). Humidity: 5% to 95% non-condensing. Storage and Transportation Temperature Range. Temperature: -40° C to +70° C (-40° F to +158° F). For more country-specific regulatory information and approvals, please see your Aruba representative.

Wi-Fi Alliance certification currently covers 802.11a/b/g/n only; 802.11ac will be added as soon as the Wi-Fi Alliance establishes the certification program during the second half of 2013. ArubaOS 6.3.0.0. Aruba Instant 3.5.0.0.

The item "NEW IN BOX ARUBA NETWORKS AP-225 WIRELESS ACCESS POINT FREE SHIPPING" is in sale since Thursday, April 21, 2016. This item is in the category "Computers/Tablets & Networking\Home Networking & Connectivity\Wireless Access Points". The seller is "tjtechkorea" and is located in SEOUL. This item can be shipped worldwide.
  • Brand: ARUBA
  • Model: New Aruba Networks, Inc PoE Access Point 2.4/5 GHz
  • MPN: AP-225 ACCESS POINT

New In Box Aruba Networks Ap-225 Wireless Access Point Free Shipping    New In Box Aruba Networks Ap-225 Wireless Access Point Free Shipping